If you want to access the internet regardless of where you’re sitting in your house, then a Netgear Orbi CBR40 router might be of some help to you. Wondering how? Well, this device is known to spread the signals of the existing network from one corner of your house to another. 

But, in order to make use of an Orbi, you need to first learn how to set it up. Although setting up a Netgear Orbi device isn’t that big of a deal, still many users get stuck during the process. Are you amongst those users? If the answer to the question is yes, then congratulations, you’ve landed on the right page looking in search of a solution. 

Through this article, I’ll help you fix the issues you’re facing while performing Netgear Orbi CBR40 setup. So, let’s get started, shall we?

Fixed: Netgear Orbi CBR40 Setup And Login Issues

  1. Perform a Proper Orbi Login

Before you get onto any troubleshooting step, it is important that you learn how to log into your Orbi properly first. And to do that, here are the instructions that you need to follow:

  • Power on your Netgear Orbi CBR40.
  • Create a secure connection between the Orbi router and modem.
  • Then, plug the Orbi satellite into a wall socket.
  • Press the Sync button and wait for both the WiFi devices to get synced.
  • Open an internet browser on your system to access the orbilogin.com page.
  • Enter the default username and password and click on the Log In button. 
  • Follow the on-screen prompts to complete the Orbi CBR40 setup process. 

Note: To log into your Netgear Orbi device, you can also make use of the Orbi app.

If learning about how to correctly perform orbilogin didn’t resolve the issue, then it’s time that you proceed to the troubleshooting tips mentioned below. 

  1. Use Correct Credentials for Orbi Login

While performing orbilogin, are you sure that you entered the correct login credentials? I mean, there is a high possibility that you’re facing setup issues because of wrong admin details. But, no worries, I’ll help you fix this little issue in a jiffy. 

If you aren’t sure about the default username and password that you’ve used to log into your Orbi CBR40, then it is recommended that you refer to the Netgear manual. If you want to opt for a more comfortable option, then you can get in touch with me. 

  1. Update the Firmware of Your Device

An outdated firmware is another reason why you are facing the Netgear Orbi setup and login issues. How? Well, it slows down your device and doesn’t let it function properly. Thus, ensure that you keep the firmware of your Orbi device updated. 

Relax! No need to blow a fuss if you aren’t sure about how to update the firmware of your device. All you need to do is, access the orbilogin page, go to the Settings option, and click on the Firmware Update option. See? It was that simple.

  1. Place the Satellite Near the Router

Still stuck with the Netgear Orbi setup and login issues? 

In that case, the distance between your Orbi router and satellite might be causing trouble. To resolve this issue, ensure that there is a safe distance between both your WiFi devices. By that I mean, place the satellite in the same room as that of the router, but not close enough that their signals start to clash. 

Additionally, keep your Netgear Orbi CBR40 device away from transmitting appliances and electronic devices. In case you still aren’t able to resolve the setup and login issues, then feel free to get in touch with me anytime through the comments section below.