Despite the upsurge in wireless and mesh networks, a wired Ethernet wiring connection has its own importance. Not only it is the most stable, but it gives you the highest speed and lowest latency.
The only downside of Ethernet wiring is that you gotta run cable throughout the house. For this purpose, you need proper planning and tools. Here we have compiled what you would need for your home Ethernet wiring.
1. A Network Wiring Plan:
Plan out already where you want your Ethernet connections and where they combine. Device a sound strategy for how you would reach there.
First, make a simple, complete floor plan for your house. It’ll help you visualize all the wired network connections. Mark out the locations where you want network connections and the access points.
Determine where to place the router and switch. It is better to run all the cables in one place to manage the switch better. Decide where you will run all the cables and how many Ethernet sockets you need for a location. Two Ethernet sockets for a location usually work best.
2. Best Ethernet Cable:
Of course, the most important thing for Ethernet wiring is the Ethernet cable. Before to go further information if you are looking to buy the best Ethernet cables for gaming visit Try10.com. Ethernet cables come in all powers (speed) rated in categories (cat). For your home Ethernet wiring, not only the speed but the quality of the cable is important. Use full bare copper cables instead of Copper Clad Aluminium (CCA) cables.
A few options you can browse for your cable selection are as follows:
- Cat6 UTP Cable
- Solid UTP Cable
- Plenum Cat6 Cable
- Cat6 Riser Cable
Keep in mind to get CAt6 cables with solid bare copper conductors. Also, it is recommended to buy a 23AWG cable. It has thicker wires, giving more Power over Ethernet.
3. Panel Patch for Home Network:
Messy and hanging wires do not look neat and are difficult to manage. However, the major concern is that UTP cables are brittle and should not bend too much. The best option is to use a patch panel.
Use patch cables in between your patch panel and switch. They have stranded wires, making them flexible and easy to bend. As for the home network, small wall-mounted or surface-mounted patch panels can work best. For example, you can use a 12 port or 24 port wall-mounted patch panel.
4. Ethernet Wall Sockets:
For the other end of Ethernet cables, you need Ethernet wall sockets. For solid wires of the Ethernet network, you need sockets with removable keystone jacks that you can punch down. It makes installation a lot easier.
As per the location of your access point, it might be difficult to use a wall-mounted socket. In this case, you can use a surface-mounted socket. Place it in any convenient location and use a normal patch cable between your access point and the socket.
5. Other tools you may need:
Aside from the network products, you would need a handful of specialized tools for installing your home network. These include:
- Ethernet crimping tool – for connecting RJ45 plug
- Punch down tool – for punching cable in keystone jacks
- Network cable tester – (optional)
- Basic DIY tools – such as a screwdriver, drill