Are you confused why your Netgear extender isn’t connecting to the router even after successfully setting it up? Well, there can a number of contributing factors leading to the issue. Some of them are as follows:

What Can Be The Reasons Behind Your Extender Not Connecting to Router

  • You ‘might have’ made a mistake while setting up your WiFi extender via 192.168.1.250. Relax. Mistakes can be committed by anyone.
  • The hardware of your Netgear WiFi range extender is at fault.
  • Have you connected your extender and router with a cable? A damaged cable connection is another reason why you’re facing the issue.
  • There is unwanted interference in the WiFi signals of your extender. Certain electronic devices and transmitting appliances tend to do that.
  • Your extender is placed in an area that does not have network service.
  • The firmware of your WiFi device is not updated to its latest version.

Now that you know why your extender is not connecting to the router, it’s time to get rid of the troublemaker. To do that, follow the troubleshooting tips mentioned below.

Extender Not Connecting to Router: How to Fix the Troublemaker

  1. Reboot the Extender

One way to fix the extender not connecting to router issue is to restart your WiFi device. Sometimes, a simple restart is enough to get rid of the technical issues.

Here are the steps that’ll assist you in restarting your extender:

  • Switch off your extender.
  • Pull the power cable from the device.
  • Wait for a few seconds and plug the extender into the outlet.
  • And, do not forget to press the Power button.
  1. Get Rid of Electronic Devices

Another major tip to troubleshoot the extender not connecting to router issue is to place your device far away from electronic devices. Placing your extender in an area filled with electronic devices also disables it from getting connected to Netgear_Ext.

So, make sure that you don’t place your extender at a location that is surrounded by electronic devices. Also, DO NOT position the extender inside a cupboard or behind a thick concrete wall.

  1. Update the Firmware

Updating the firmware of your Netgear WiFi range extender is another way through which you can get rid of the issue. All you need to do is, follow a few quick instructions mentioned below:

  • Open a web browser on your computer.
  • Type mywifiext in its address bar.
  • Press the Enter key to proceed further.
  • Then, go to the Settings option.
  • Click on the Administration button.
  • Can you see any firmware updates available? If yes, then click on the Firmware Update option.

And you’re done! Updating your Netgear extender will surely help you in resolving the issue. On the off chance if it doesn’t, then worry not. We have another troubleshooting tip stored inside the box for you.

  1. Reset the WiFi Device

Performing factory default reset is the ultimate fix that comes into the picture when nothing seems to work. But, it sure as hell does wonders and fixes any technical issue that you’re facing with your extender.

So, without wasting any more time, go through the following step-by-step guidelines and know how to restore your extender to its factory default settings:

  • Locate the Reset button on your extender.
  • Take a sharp pin-like object and press the button.

Within a few minutes, your extender will get restored. Now, set up your WiFi device from scratch and connect it to the router.

RELATED ARTICLESMORE FROM AUTHOR