Nearly 80 percent of users across the globe face issues with their networking devices and Netgear is not an exception. Though Netgear range extenders have grabbed many eye-balls, users report issues with it and the most common issue that users cope up with is that their “Netgear extender creating WiFi connection”.
If your Netgear extender is also troubling you and you can’t surf the internet in anyway, then this write-up covers some of the best fixes to troubleshoot Netgear extender creating WiFi connection issue.
Your Netgear WiFi range extender might be creating WiFi connectivity issues for several reasons, ranging from no or poor internet to being placed at a bad area. Through the reasons may vary from situation to situation, it is easy to troubleshoot Netgear extender creating WiFi connection issue.
Have a quick glance at the troubleshooting tips highlighted below to figure out the problem behind Netgear extender creating WiFi connection issue.
Fix Netgear Extender Creating WiFi Connection Issue
Before you go further and apply the hard fixes to troubleshoot Netgear extender creating WiFi issue, it is suggested to power cycle your device. The power cycling or the restart process works in most cases and fix Netgear extender creating WiFi connection issue.
To power cycle your Netgear extender:
- Disconnect it from your router and other WiFi-enabled devices (if connected).
- Unplug your Netgear extender from its respective power outlet.
- Wait for a few seconds and plug your Netgear extender back in again.
After the power cycling process, login to extender and try to access the mywifiext net login page. If this process makes your WiFi up and running, congrats – you did it! Else, you need to apply more troubleshooting tips to fix Netgear extender creating WiFi connection issue. Have a look at the Netgear extender troubleshooting tips listed below:
The Wired Connections are Improper
Many network connectivity issues can persists due to loose or improper wired connections. To cope up with the issue, cross-check all the wired/ Ethernet connections of your Netgear extender along with router and other WiFi-enabled devices and ensure that there isn’t any problem. Bear in mind – if any broken, dusty or rusty cable is connected to any of your devices, replace it. Doing so will help you fix Netgear extender creating WiFi connection issue.
Remove the Wireless Interference
If you think that your Netgear WiFi range extender is the only device that is broadcasting wireless signals, let us tell you that you are mistaken. There are many devices and appliances in your house that can interfere with your extender’s WiFi signals.
The best way to cope up with this issue is to change the wireless channel of your Netgear WiFi range extender. To do so, login to extender via http://192.168.1.250 IP.
Improper Netgear Extender Setup
A partial or improper configuration of the device can also results in Netgear extender creating WiFi connection issue. Thus, to fix the issue, ensure that your Netgear WiFi range extender is configured properly.
Epitome of Convenience: Contact our competent experts if you don’t know the exact and complete process to set up your Netgear WiFi range extender.
Update the Netgear Extender’s Firmware
Still, your Netgear extender WiFi connection is running at snail’s pace? If so, then updating Netgear extender’s firmware can help you out. Login to extender via http://192.168.1.250 IP or mywifiext.net and check of there is a new firmware version available for your Netgear WiFi extender. And if you found any updates available for your Netgear extender, get it updated by following the given on-screen instructions.
Pro Tip: Get connected to Netgear_ext SSID. Doing so, will help you configure your Netgear extender and in updating the firmware without any hassle.
