Exterior of any property may seem like an exclusion but it is one of the most important features of any property. It should match the purpose of the building. Special consideration must be taken for the fact that most of the buildings require lighting even at night time. In such cases, the exterior lighting not just serves the purpose of lighting but also ambiance and security.
Exterior lighting requires special fixtures and nowadays there are several different types of fixtures available for different zones around the property. Exterior lighting did by two main fixtures:
LED wall pack
LEd wall packs are light fixtures for boundary walls of any parameter. They are excellent supplemental lights which also aids in enhancing the security of the area. A usual wall pack light is small and fixes on the surface of the wall, it is also mountable on the top of the building or on the ground. The mounting options give a lot of room for creating different lighting layers.
The housing of the wall pack is IP rated against external environmental factors and provides support to the electrical components. It is usually made up of aluminum and has a glass or polycarbonate lens. LED-wall packs are available in different cut-off designs which allow directional lighting. LED wall packs are highly convenient, bright, and efficient light fixtures for commercial areas.
LED floodlights are quite an all-rounder fixture when it comes to illuminating any wide and open space. As the name suggests these light fixtures flood the area with light. Floodlight fixtures are for outdoors and they are super bright with wide beam angle and larger beam length. A floodlight fixture is usually available in different sizes and designs as per the requirement of different outdoor areas like a field, a garden, backyard or front yard, park or any parking lot.
LED flood light fixtures either have integrated LED lamps or replaceable LED lamps. They are brighter than their traditional equivalents.
Why do we use LEDs?
Over the past decade, many manufacturers recommend the use of LED light in fixtures in all spaces. There are several reasons why they are a success as most traditional lamps are inefficient when it comes to outdoor lighting as there are many factors included. Traditionally all flood lights carry HID or HPS lamps but they have been so inefficient when it comes to long term lighting without excessive maintenance costs. These lamps heat up a lot, flicker and even burst in some cases. LEDs on the other hand are made to combat these challenges and have been quite successful thus far.
They produce higher lumen output, do not flicker, work in extremely harsh conditions and are customisable for various applications. There is a range of outdoor commercial light fixtures available in the market which you can browse here.
Tips for installation
Prior to the installation of any fixture, it is important to recognize the needs of the environment and the fact that outdoor lighting comes with certain implications. In most commercial spaces or residential spaces, the first issue is about neighboring spaces. To achieve a swift lighting layout it is necessary to consider the layout which will help in determining the type and positioning of the fixture. Here are a few tips to follow:
Plan a layout
Planning a layout prior to installation is always important, in most cases, it is feasible to hire a contractor who can get an accurate estimation of cost and other special requirements for any area. For most commercial spaces it is important to get professional assistance to avoid any mishaps. A layout is easy to plan for an outdoor parameter as in most cases a few floodlights are more than enough for general lighting as well as security but it differs from building to building. Check for neighboring areas as the light must not be interrupting the traffic or residents around the building instead illuminating the neighboring area as well.
Other outdoor light fixtures are for supplemental lighting and improve security as well as visibility.
Calculate lumen requirement
The total lumen requirement can be estimated by comparing the lux output with the area the light can cover. For smaller fixtures, it is important to check their cut-off designs and positioning. LED light fixtures to project light under a fixed beam so it is easier to determine the total area illuminated by one fixture.
A layout helps with estimating the total number of fixtures and their positioning. In this way, a uniform lighting layout is achievable which is glare-free for the surroundings and easy on the investment costs.
Check with local area lighting regulations
The local area regulations for outdoor lighting differs in all countries. Most of them push the dark sky compliance and promote the use of LED light fixtures with different cut off designs. It has several benefits and reduces pollution as well. The use of LED light fixtures is recommended as they operate on green lighting technology which is also safe for the environment.
Any exterior area is easily transformable with LED lighting. These lights make installation as well as maintenance easier. Due to the many customizable features of LED light fixtures ambient lighting to enhance the curb appeal of any area is now possible. It helps with architectural lighting, facade lighting, and general lighting. A few of the eccentric features of LED fixtures are:
Switchable correlated color temperature
These lights can produce warm yellow to cool white light which is adjustable on a Kelvin scale ranging from 2500K to 6000K.
LED light fixtures are also remote control and also have photocells options, so it is easier to control the light according to the requirement.
Different mounting options
Most of these fixtures have a variety of mounting brackets which allow free rotating options. In-wall packs, have different mounting options as well as different cutoff designs. These lights are easy to install anywhere around the parameter and do not require any extra changes.
Adjustable beam angle
Most flood light fixtures have adjustable beam angles for the effective spread of light. It ranges from 60-120 degrees and with several mounting options and cut-off designs it allows facade lighting, general lighting and enhances the aesthetic appeal of the parameter.