Are you building gaming PCs?

On average, a gaming PC costs from $800 to $1,200. If you want to run modern games at 60+ frames on the highest settings, you’ll spend over $2,000. The cost depends on your purpose of getting a gaming PC setup.

As such, you have to do it right, especially if you’re a beginner. Read on to learn the mistakes you must avoid while building one.

1. Not Doing Enough Research

It can be exciting to buy the necessary parts for your gaming PC. However, never forget it’s a long-time commitment. After all, the parts can be expensive.

Take the time to research first. Research the best parts in the market right now and their average cost.

Consider the types of video games you want to play on your rig as well. Think about the programs you’ll use, such as video editing software or even Spoofer IWantCheats.

It’s an important factor when deciding the parts to buy. The more intensive the games are, the more powerful your parts must become.

If you have a gaming PC setup budget, increase it as you go. PC parts can be more expensive than expected.

2. Forgetting to Check for Compatibility

While doing your research, check for compatibility. An Intel processor, for example, won’t fit in an AMD motherboard.

There’s no adaptor to enable you to use both, either. You have no choice but to get a refund and buy a new, compatible part.

The good news is a lot of online guides allow you to learn about hardware compatibility. You’ll come across this subject while doing your research right.

3. Forgetting the OS

When thinking of building a gaming PC setup, focus on the parts you need to buy. It includes the graphics card, processor, display, and other important gaming rig components. However, don’t forget to buy the software.

Without an operating system, you can’t use your high-end PC parts.

For a gaming setup, many prefer the Windows operating system. It offers the best selection of titles, as games usually release on this OS.

Many games are exclusive to this platform as well. It’s no surprise since Windows holds 77% of the operating system market share.

4. Being Too Nervous

It’s understandable to be nervous about building your gaming PC, especially for the first time. After all, it costs thousands of dollars to build. A wrong move could damage an expensive part.

It’s not a crime to be more careful when you’re building. However, make sure you’re not too careful.

You’ll learn as you go through many connectors, some requiring significant force to install. You may not plug them the right way if you’re too afraid to apply force.

Furthermore, shaky hands might screw up with alignment. You might end up with crooked screws or you damage some components trying and failing to hook up the cables.

5. Not Preparing for Static Shock

Did you know that you risk damaging your components via static charge when simply holding them? Even when you’re only pulling your new stick of RAM out of its bag, your static charge could zap it.

If you’re working on carpeted floors, the risks are higher. However, you might still experience static shock even on a non-carpeted floor.

You’ll have to ground yourself first. Touch a metal part of your computer case to neutralize your static charge. You can also keep yourself grounded by keeping your hand on it the entire time.

To be extra safe, buy an anti-static wrist wrap. Wear it around your wrists and attach it to your PC case. Leave it like this while building your PC.

6. Not Plugging In Everything

We get it, you’re excited to run and test your computer after installing PC parts. It won’t run the right way if you forget to plug even one component, though.

Before you screw the case closed, check your cables first. Ensure they’re attached to the right components.

Check one more time to ensure every connection is secure. Attempt to run the computer before closing the case to see if you missed something.

While we’re on the subject, another rookie mistake is plugging your monitor into your motherboard. If you do this, your computer will use your processor’s integrated graphics instead of your graphics card. You’ll know if you made this mistake when the display looks poor and the performance is not below your expectations.

7. Disregarding the Manual

A classic mistake people make when building gaming PCs is going straight for it. People will say it’s easier than you think – that you only need to match the ports. However, it’s also easy to make a mistake when you’re overconfident.

Read every component’s manual before installing them. Even if you already read tips on the internet, each part might have special instructions to consider depending on its model.

It’s okay if reviewing takes a day more, as long as your gaming PC comes to life successfully. When operating on a budget, you can’t afford costly mistakes. Sometimes, the wrong connection will cause your PC’s new components to break.

If you have any doubts or need clarifications, don’t hesitate to contact the manufacturer. You can also reach out for help from more experienced builders instead of figuring it out on your own.

When worse comes to worst, it’s best to get experts to build your PC in your stead.

Be Confident When Building Gaming PCs

One trick to be more successful in building gaming PCs is to be more confident. It’s all about figuring out where something fits – like playing with baby blocks shapes. However, you have to fit them the right way.

A great way to be more confident is to learn more about building a PC. For more information, read our other posts today.